Tesys Advanced

..

TeSys GB circuit breaker, 2 poles (2P), 4A/415V, for the protection of industrial equipment control circuits. It provides thermal magnetic protection with a magnetic tripping level at 52A (13 In) and breaking capacity Icu 3kA@415V. It can also be used for protection of DC loads up to 4A/48V DC-13 wi..

TeSys U communication gateway for interfacing groups of up to 8 x TeSys U starter controllers connected on the same Modbus serial link to a Profibus DP field bus. On front side, it provides the Profibus DP connector, and device and communication LED status. It provides on the bottom 2 x RJ45 connect..

TeSys U communication module for CANopen, to be inserted in advanced power bases LUB120, LUB320, LUB380 equipped with a BL type (24V DC) LUC control unit. It provides a 9-point SUB-D male connector for connection to a CANopen network, a plug-in terminal block for the connection to an external power ..

TeSys U communication module for DeviceNet (slave type), to be inserted in advanced power bases LUB120, LUB320, LUB380 equipped with a BL type (24V DC) LUC control unit. It provides a 5-point plug-in connector for connection to a DeviceNet network, a plug-in terminal block for the connection to an e..

TeSys U communication module for Profibus DP, to be inserted in advanced power bases LUB120, LUB320, LUB380 equipped with a BL type (24V DC) LUC control unit. It provides a 9-point SUB-D female connector for connection to Profibus DP network, a plug-in terminal block for the connection to an externa..

TeSys B spare parts, set of contacts (1 fixed contact and 1 moving contact), for contactors CV1B size F. 1 set required per pole for contactors CV1BF. It conforms to RoHS/REACh regulation...

TeSys Integral 3-pole contacteur breaker 63A/690V for control and protection of motors up to 30kW@400V. To operate, it must be fitted with a magnetic or thermal-magnetic protection module, available for motors from 5.5 to 30kW@400V (to be ordered separately). It ensures a high breaking capacity Icu ..

..

..

TeSys Integral contactor breaker, 3 poles, 63A/690V AC-43, for control and protection of motors up to 30kW@400V. To operate, it must be fitted with a magnetic or thermal magnetic protection module, available for motors 5.5-30kW@400V (to be ordered separately). It ensures a high breaking capacity Icu..

TeSys U control terminal block to be inserted in a reverser block LU2M* or LU6M* for the local wired control of a reversing starter controller. To be used for FW/RV/OFF control of reversing motor applications with wired control. It provides screw clamp terminals for the wiring of the FW/RV/OFF contr..